New Products from Buggy Kite Shop

Rim 1.85"x17" Aluminum

Sat, 19 May 2012 12:17:09 +0000

Buggy Aluminum Rim 1.85"x17"

-Perfectly Symetric

-Alloy A356 used for marine equipment

-Heating treatment T6 to improve the mechanical properties.

-Phosphorus treatment and tropical varnish to make it rust-proof and to assist the maintaining.

-Size of the Ball bearings is 42mm exterior diameter, 20mm interior diameter and width 12mm.

-Hub Width = 62mm -Weight = 3.2 Kg

Can be used for every type of buggy, landsail...

Tires dimensions allowed all 8inch interior diameter.

Tubeless or not is up to you, the hole for the valve is 11.5mm.

IMPORTANT: Not for highway service.Rims are designed for buggy kite and landsail applications. Customer will take the entire responsibility by using the rim for any-others applications.

Excl. Tax: €82.78 Incl. Tax: €99.00

Sysmic Stake (2 pcs)

Sat, 19 May 2012 12:17:09 +0000

Sysmic Stake
Removable Stakes, can fit all kind of place and buggy.
Stainless steel 304L
Sold by 2.

Excl. Tax: €14.70 Incl. Tax: €17.58

Sysmic Foot Strap (2 pcs)

Sat, 19 May 2012 12:17:09 +0000

Sysmic Foot Strap
Removable Strap, this velcro band can fit all kind of foot strap buggy, and can be easily adjustable.
100% Nylon
Sold by 2.

Excl. Tax: €4.18 Incl. Tax: €5.00

Wheel MIDI XL 18x8.5-8, 4" Rim

Sat, 19 May 2012 12:17:09 +0000

Roue Midi XL 18x8.5-8
Roue Complète:
-Jante: 4''x8'' Aluminium 8 barres
-Pneu: Deli Midi XL 18x8.5-8, Sculptures en lignes, 4 plis
-Tubeless
-Roulements: (2) 42-20-12 Acier
-Entretoise: Acier Galvanise

Les dimensions varient en fonction de la pression de gonflage:
Diam.: 430mm
Larg.: 185mm

Pression conseillée: 1.0 bar
Poids total 5.8 kg

Excl. Tax: €71.23 Incl. Tax: €85.19

Wheel Lenticular 17x2.3/4

Sat, 19 May 2012 12:17:09 +0000

Lenticular Wheel 17x2.3/4
Thin grooves with inner-tube (Possibility Tubeless)

Full Wheel, Dimension precisions:
-Tire: 17x2.3/4
-Out diameter = 535mm
-Width = 70mm
-Inner diameter = 17inch or 430mm
-Nylon structure
-Ball bearing: (2) 42-20-12 Steel (for axle 20mm)
-Spacer: Galvanized Steel

Exterior diameter and width depend on tire air pressure.
Optimum pressure: 0.9 bar
Total Weight 6.2 kg (5.4kg if Tubeless)

Speed index: J (62mph-100km/h)
Load index: 47 (385lbs-175kg / tires)

Excl. Tax: €124.13 Incl. Tax: €148.46

Sysmic S2 Compact (Steel)

Sat, 19 May 2012 12:17:09 +0000

SYSMIC S2 Compact Steel

Applicability Leisure
This buggy is also advised for beginner and advanced riders, looking for a compact product. Using the experience of the S1, the S2 link performance, comfort and safety. The S2 is very convenient to transport due to its small size and can gives you very good sensations...

4 Configurations (Same structure with different wheels):
-Sysmic S2 STD - Rim 2.5x8 - Tire Standard (38kg)
-Sysmic S2 STD XL - Rim 4x8 - Tire Standard XL (39kg)
-Sysmic S2 MIDI - Rim 4x8 - Tire Midi (44kg)
-Sysmic S2 MIDI XL - Rim 4x8 - Tire Midi XL (45kg)

Body Design features
- Length min/max (axis wheels): 1350mm/1450mm,
- Width (bearing surface wheels): 1375mm,
- Adjustment on the beam: 100mm,
- Weight of the structure and fastenings: ±26kg,
- Construction: 100% Steel, Hot electro-galva treatment, primary anti-corrosive layer, Extra-Strong Black Mate Paint
- Wheel Axles: 100% stainless steel 304L polished finishing
- Fastening: 100% stainless steel 316L
- Bearings: steel with flasks
- Front wheel angle: 30° / Distance: 30mm

Adaptable wheels
- Front wheel diameter min/max: 400/420,
- Front wheel maximum width: 190mm,
- Rear Wheels diameter min/max: 400/550,
- Wheel axle before/back: 20mm,
Warning, certain types of wheel will require some modifications. Please refer to technical notice § “wheel axle”.

Composition
- Steel body and Stainless Steel 316L fastenings
- Seat: maximum loading 110kg
- Wheels refer to configuration selection
- Lateral and rear protections made in fabrics D1800 plus foam 30mm
- Transparent sand protection
- Technical Notice

Excl. Tax: €556.02 Incl. Tax: €665.00

Peter Lynn Harness

Sat, 19 May 2012 12:17:09 +0000

Harness Selection

-Radical

The Radical seat harness is designed for optimum comfort while kiting. The Radical has been developed to distribute the load comfortably over the body, no matter where the kite is flying in the wind window. The harness is fitted with an extra soft back support and soft neoprene leg straps. The harness is made from first-rate and hard-wearing materials and has webbing straps running through the harness for maximum durability. The Radical harness features a grab handle and solid leash attachments on the back. The harness is supplied with a spreader bar pad preventing the spreader bar from digging into your chest and protecting your clothing if you are using a wheel spreader.

Available in sizes XS, S, M, L & XL, either as a separate harness or with Bullet spreader, Prodigy spreader or standard spreader bar.

Waist sizes in Cm:
XS: 82 – 96 cm
S: 86 – 102 cm
M: 94 – 110 cm
L: 104 – 121 cm
XL: 118 – 134 cm

-Divine

The Divine seat harness is a new harness, designed specifically for buggy racing. Most harnesses used by buggy riders are traction kiting harnesses. These harnesses are designed to fit the body comfortably when standing while flying your kite. However in a sitting position the harness is not comfortable when flying for a very long time. The Divine harness was specifically designed to fit the rider perfectly when sitting in a buggy. Above this the harness is made to be extremely smooth around the back to allow easy movements in your buggy seat. The Divine harness is supplied with a spreader bar pad for more comfort as well as preventing clothing such as expensive dry suits from getting damaged.

Available in sizes XS, S, M, L & XL either as a separate harness or with Bullet or Prodigy spreader bar.

Waist sizes in Cm:
XS: 82 – 96 cm
S: 86 – 102 cm
M: 94 – 110 cm
L: 104 – 121 cm
XL: 118 – 134 cm

Spreader Bar Selection

-Standard

The standard spreader features a fixed hook to connect your depowerloop or harness line to.

-Bullet

The Bullet wheel spreader ensures more comfort when using your harness, as the front section of the spreader bar can move up and down. This prevents the whole spreader bar from twisting. Besides the reduced wear on your harness, it also prevents the ends (to which the webbing straps are attached) from pushing into your body. As the wheel stays more in a straight line with your harness line, it runs smoother.

-Prodigy

When you are looking for the best of the best, the Prodigy wheel spreader is your spreader of choice. A unique combination of optimum functionality, maximum features, high quality and excellent finishing makes this spreader a true work of art. The front section of the Prodigy can move up and down, move left and right and fully rotate. With this spreader bar the comfort on the rider is phenomenal, as the spreader bar back part is not forced in any direction while riding but stays in a fixed position to the body. The Prodigy spreader is aimed at the competition buggy scene. When needing to go upwind in a buggy race, riders make upwind turns with their buggy. While doing this the flying lines are twisted. The lines can easily be untwisted by spinning the handles. The rotating front section of the Prodigy spins easily to undo any twists in the harness line. The Prodigy features a small plastic tag preventing your line from accidentally unhooking during your ride.

Excl. Tax: €66.05 Incl. Tax: €79.00 As low as: €0.00

Sysmic S1 Impact (Stainless Steel)

Sat, 19 May 2012 12:17:09 +0000

SYSMIC S1 Impact Stainless Steel
Do you feel vibrations ?

Applicability Race and Leisure
This buggy is advised for 6months experienced riders, looking for performance and safety. The possibilities of adjustments had been designed for the competition, but who never had the dream to sit in a comfortable “race replica” even for one small run?
Take the ride of the absolute buggy, designed by passionate for passionate.

Body Design features
- Length min/max (axis wheels): 1775mm/1925mm,
- Width (bearing surface wheels): 1500mm,
- Adjustment on the beam: 150mm,
- Weight of the structure and fastenings: ±35kg,
- Construction: 100% stainless steel 304L polished finishing
- Fastening: 100% stainless steel 304L plus surface treatment
- Bearings: steel with flasks
- Set-up the rear wheels position: integrated into the axle 0° or 7°
- Wheels pinching/pitching: adjustment onto the rear axle
- Front wheel angle: 30° / Distance: 30mm

Adaptable wheels
- Front wheel diameter min/max: 540/600,
- Front wheel maximum width: 255mm,
- Rear Wheels diameter min/max: without particular restriction in leisure,
- Rear Wheels maximum width: without restriction particular in leisure,
- Wheel axle before/back: 20mm,
Warning, certain types of wheel will require some modifications. Please refer to technical notice § “wheel axle”.

Composition
- Treated Stainless steel body and fastenings
- Seat: maximum loading 110kg
- 3 wheels: Beach Racer tire 21/12-8 with grooves, Front aluminum rim 4''x8'', rear aluminum rims 8''x8'' , bearings and spacer
- Lateral and rear protections made in fabrics D1800 plus foam 30mm
- Sand protection made in rubber
- Technical Notice

3 Possible Configurations:
-Big Foot XL - Rim 4x8 - Tire BigFoot (56kg)
-Big Foot XXL - Front Rim 4x8, rear Rim 8x8 - Tire BigFoot (58kg)
-Lenticular - Rim 1.85x17 - Tire Slim (47kg)

Excl. Tax: €1,199.83 Incl. Tax: €1,435.00